Document for ccie lab exam

News about ccie lab exam

Configuring PPP multilink and fragmentation over Frame-relay

Sat, 19 Aug 2006 02:59:55 +0000
* Remove ip address of serial subinterface interface
* Remove DLCI of subinterface.
* Its recommended to do this configuration on the remote site first.
int s0/0.9
no ip address
frame-relay interface-dlci 900 ppp virtual-template 1
int virtual-template 1
ip add 10.1.1.1 255.255.255.0
ppp multilink
ppp multilink interleave
ppp multilink fragment-delay 10 — milliseconds.
service-policy output VATS

VT advantage - unlimited

Sat, 22 Jul 2006 01:30:18 +0000
VTA uses CAST protocol. Uses 4224 TCP port. This protocol helps in discovering remote VTA capable endpoints, communicates with IP phone as well as with Callmanager. To ensure proper QOS is given to CAST, on the phone port, create a service policy to mark TCP 4224 with DSCP CS3.
VTA uses two types of codecs.
a. H263 ...]

Pingback from Top CCIE’s « #sh ip route vrf CCIE

Step #1.

Fri, 02 Jan 2009 07:23:44 +0000
I have been on, I guess you can call it, whirlwind kind of ride the past few weeks. Since finishing up with my CCVP back toward the end of November I have been up and down about what to do next. I never wanted to embark upon the voice, or what we call it at ...]

IP Expert Lab 3 - Script Feedback

Wed, 24 Sep 2008 18:31:30 +0000
Below is a response I had from Tyson Scott at IP Expert - he is the guy who writes the grading scrip

We worked hard to come upon this respectable composition on ccie lab exam. Don't let these efforts go to vain; use it wisely.



ccie lab exam
ccie lab exam
ccie lab rental | ccie lab rentals | ccie lab routers